Ballu KFR-2501G/Y2BPE, Service Manual

Page: 10 / 70

9
1. PART NAMES AND FUNCTIONS
REMOTE CONTROL UNIT
1 Ð ¡ Ê ±
AUTO
S E T T E M P S E T T E M P
C
A
HOUR
ON
OFF
1HR
ON/OFF
TEMP.
HIGH
POWER
FLAP
ON OFF
SET CANCEL
SENSOR
BATTERY
FAN SPEED
SOFT
RESET
SLEEP
MODE
Sensor
Testing the ambient temperature
of the remote controller
LCD
Displaying the running condition.
Hi-power Operation. Button
Vertical Air-flow
(Up-down adjustment)
Timer On/Off button
Timer Setting
A/C Sensor Button
Press the button if the remote
control unit is liable to be affected by
the heat resource, such as electric
blanket, radiator or sunlight, this will
use the sensor of indoor unit, the
symbol will appear on the LCD.
Transmitter
Transmitting signals to the indoor unit.
On/Off Button
Turn the appliance on and off by
pressing consecutively.
Temperature Setting Button
Press the button marked " "or
" " to increase or decrease
the temperature.
Mode selection button
Auto Heating Dehumidification
Fan Cooling
Fan Speed Selection
Sleep Mode Selection
Reset
Press the button after batteries are
loaded and indication appears on LCD.
Duel Energy-saving
This function can be used for
Restricting the max. electric current
by control software.
Sliding Cover
Battery Compartment
REMARK: The remote controller transmits signal to indoor unit at 3 minutes intervals. If the indoor unit has not received the signal
for more than 10 minutes due to remote controller missing or other reason, the sensor on indoor unit will be used for
detecting indoor temperature automatically. Here, ambient temperature of remote controller is likely to slightly different
from that detecting by the indoor unit, temperature will be compensated automatically. when the remote controller is
missing or the batteries are exhausted, please use the temporary switch.
AUTO
AUTO
TEMP.DISP
1-hour Timer
Temperature Displaying Button
Press the button repeatedly, you can see
the temperature of the setting, indoor and
outdoor on the control panel of indoor unit.
1HOUR
Timer Inactivation
KFR-5701GW/Y2BPE