Ballu BHG-10, Operation Manual

Page: 5 / 38

5
Safety rules
• Do not attempt to repair the
appliance by yourself. Contact
a qualified technician.
• After transportation at negative
temperatures, it is necessary to
withstand the heat gun in the
room where it is supposed to
be used, without switching on
the network for at least 2 hours.
• Never use the gun in a room,
or near flammable objects,
flammable liquids. Danger of
fire!
• During operation, check that the
room ventilation is adequate.
Use only in well ventilated areas.
Insufficient level of ventilation
can lead to poisoning with
carbon monoxide, fumes, fires.
• This hot-air gas heat generator
is intended for industrial use
only.
• For safety reasons, do not leave
the packaging (polyethylene
film, cardboard) unattended for
children.
• Do not allow children to play
with plastic wrap. Danger of
suffocation!
CAUTION!
• Do not use aerosol cans
near a working gas fan heater,
pressurized gas can cause fires
or breakages.
• Do not use the gun in rooms
where air contains small
particles of wood chips, scrap
paper or other flammable fiber.
• Never cover the openings of
the heat gun, do not cover it
during use.
• Never change the design of
the heat gun, do not over-build
your own fixtures.
• Do not use in rain or snow, do
not use in rooms with artificially
high humidity (sauna, swimming
pool).
• Before any inspection or
maintenance, unplug from the
wall outlet.
• During operation, monitor
the heating of the surface on
which the heater is mounted.
Overheating of the surface can
lead to a fire.
• Ventilate the room before using
the heater.