Ballu BHG-10, Operation Manual

Page: 11 / 38

11
Troubleshooting
Table 3
№ Cause Remedy
1.
The power supply is
defective
Make sure the plug is
plugged. Check the power
supply to the network.
2.
The motor is blocked
or defective
Check and replace if
necessary.
3.
Fan blocked /
defective
Check and replace if
necessary
4.
Switch connections
loose / defective
Check and replace if
necessary
5.
No gas pressure and
/ or gas flow to the
solenoid
Ensure that the gas supply
to the cylinder is turned
on. Make sure that the gas
cylinder is full / "unfrozen"
6. Solenoid closed
Solenoid closed Check the
solenoid of the valve and
its connections. Adjust or
replace if necessary. Check
the thermostat
7.
The electrode is not
adjusted or defective
Check and adjust according
to scheme 1 or 2. Replace if
necessary
8.
The inlet / outlet or
internal parts of the
pipeline are dirty or
partially blocked
Check and clean if
necessary
9.
The thermostat
switches on and
turns off the gas
heater
Check and replace the
thermostat if necessary
10.
The gas valve or
thermocouple is
defective
Check and replace if
necessary (Make sure the
gas valve button is pressed
for 30 seconds after ignition)
11.
The thermocouple
is not correctly
adjusted
Check the thermocouple.
Adjust according to scheme
1 if necessary
12. The pressure
regulator is defective
Check and replace if
necessary
13. Leak in the gas
supply line
Immediately close the
gas supply in the cylinder.
Check all connections in
the supply line for leaks.
(Use a soapy solution to
determine the presence of
leaks DO NOT USE OPEN
FLAME!)
Table 2
Table 1
Scope of supply
Troubleshooting
See Attachment
Repair of the heat generator must be carried out
only in specialized workshops.
A list of possible malfunctions and methods for
their elimination are given in Tables 2 and 3.
Name Quantity, pcs.
Gas heater 1
Gas hose 1
Pressure regulator 1
Operation manual 1
Handle (for models BHG) 1
Screw М4*14 (for models BHG) 2
Support (for models BHG-M) 1
Problem Cause
А Motor does not turn on 1,2,3,4
В
The fan rotates, but the gas gun
does not light up
5,6,7,8,9,10
С
Flame does not light after the gas
valve button is turned on
7,10,11
D
The gas flow is interrupted. The
flame goes out
7,8
Е
Gas heater consumes too much
gas
12,13
F
The gas heater completely shut
down
1,4