Ballu BHG-10 Operation Manual Download Page 12

12

Storage and transportation

Keep the heat generator is recommended in 

closed or other rooms with natural ventilation at a 
temperature of + 5 ° C to + 40 ° C. The maximum 
value of the relative humidity of air during storage 
is not more than 80% at a temperature of + 25 ° 
C. Keep fan heaters on shelves for a long time.

It  is  allowed  during  storage  to  stack  heat 

generators  in  two  rows  in  the  manufacturer's 
packaging.

Transportation  of  the  heat  generator  should 

be  carried  out  in  covered  vehicles  of  any  kind 
ensuring safety, in accordance with the rules for 
the carriage of goods operating on this mode of 
transport. For intracity transport, heat generators 
may be transported without transport packaging.

During  transportation,  the  possibility  of 

moving  heat  generators  inside  vehicles  should 
be  excluded.  Do  not  allow  water  to  enter  the 
package of the heat generator.

Service life

The fixed service life is 5 years.

Disposal

The time-expired appliance can’t be disposed 

with household waste (2012/19/EU).

At the end of its service life, the appliance must be 

disposed of in accordance with the norms, rules and 

methods applicable at the place of disposal.

 
Do not dispose of the appliance with household 
waste.
When the product has reached the end of its service 
life, take it to a collection point for disposal if required 
by the regulations in your area. This will help to avoid 
the potential consequences for the environment and 
human health, and will also facilitate the reuse of the 
product components.
For information on where and how you can dispose 
of the appliance, contact your local authority.

Date of manufacture

The  date  of  manufacture  is  indicated  on  
a  sticker  on  the  body  of  the  appliance,  
and  also  encrypted  in  Code-128.  The  date  
of manufacture is determined as follows:

а – month and year of production

Do not remove and keep safe the serial number 
on the device’s body. If the serial number sticker 
is  lost  or  damaged,  it  will  not  be  possible  to 
restore the production date if necessary.

Warranty

Warranty  service  is  performed  according  to 
the  terms  specified  in  the  “Warranty”  section.

 

Warranty:

•  Warranty period for the item is two years from 

the purchase date. If any defects occur due 
to  defects  in  materials  and/or  workmanship 
during this two-year warranty period, the item 
should be repaired or replaced.

•  Free maintenance or replacement is possible 

only  in  case  if  convincing  evidence  is 
provided, for example a stub, which confirms 
that the day when the service is requested, is 
within the warranty period.

•  The  warranty  does  not  cover  products  

and/or parts of the product that are subjects 
to  deterioration,  may  be  considered  as 
expendable  supplies  or  which  are  made  of 
glass.

•  The  warranty  is  void  if  the  defect  is  caused 

by  damage  ensuing  by  misuse,  poor 
maintenance (for example, a failure occurred 
due  to  ingress  of  foreign  objects  or  liquids) 
or  if  changes  or  repairs  were  performed  by 
persons not authorized by the Manufacturer.

•  For  the  correct  use  of  the  product,  the  user 

must strictly follow all included in the manual 

Storage and transportation

Summary of Contents for BHG-10







































Reviews: