BALLHOG Icon Series, Installation And Owner'S Instructions

Page: 8 / 16

Backboard
Bolt
Backboard
Bolt
Flat
Washer
Flat
Washer
Flat
Washer
Locknut
Step 3
Flat
Washer
Flat
Washer
Locknut
Backboard
Bolt
Flat
Washer
Step 2
8
WARNING
Two or three people in good physical condition and capable of
lifting at least 90-100 lbs. (40-45 kg) each are recommended for
safe installation and assembly.
IMPORTANT
The installation clip MUST be in place to maintain the proper
installation angle.
TIME OUT TIP: Lay the unopened box
upside down AND let the lid open up and
fold away from the goal system.
Step 1: Open lid of box containing backboard and slide
the backboard face down under lower extension arm, with rim
mounting plate facing towards goal system.
TIME OUT TIP: The backboard attachment can be
eased by cranking the jack to help align lower
extension arms above the backboard prior to lifting it.
Backboard Attachment
Step 2:
Carefully lift the bottom of the backboard to
align lower backboard holes with lower extension arm
holes.
Using ratchet and wrench, attach backboard to arm using
the following hardware: two backboard bolts, four flat washers
and two locknuts. NOTE: This is a pivot point! DO NOT over-
tighten. Snug tighten only.
Step 3: Lift top of backboard to align upper holes
with upper extension arm holes using the same hardware
and procedure as in Step 2.
1
/
2
” Locknut (4)
1
/
2
x 2
1
/
2
”
Backboard Bolt (4)
1
/
2
” Flat Washer (8)
HARDWARE:
TOOLS:
3
/
4
” Socket,
3
/
4
” Wrench