background image

NOTE:

 

Remove all parts and hardware from the box along 

with any plastic protective packaging and carefully lay all the

parts out on a clean, flat surface.
DO NOT discard any contents until after assembly and 

installation is complete to avoid accidentally discarding small 

parts or hardware.
Recommended Location for Use: Dry Indoor Environment

Assembly Time: 5 Minutes

PARTS

Check to make sure you have the following:

INCLUDED:

NOT INCLUDED:

Page 2 of 4

1 -

 

40 Watt Max Type A Bulb OR

1- 9 Watt Max CFL Bulb

 

1- Lamp (A)

1- Felt Pad (B)

Summary of Contents for LL307

Page 1: ...ly inserted Do not alter the plug These Assembly Instructions are provided for your safety It is important that they are read carefully and completely before assembling this Lamp This product must be installed with the applicable installation code by a person familiar with the construction and operation of the product This Lamp has been rated for up to a 40 Watt MAX Type A Bulb Included or NOT Inc...

Page 2: ... discard any contents until after assembly and installation is complete to avoid accidentally discarding small parts or hardware Recommended Location for Use Dry Indoor Environment Assembly Time 5 Minutes PARTS Check to make sure you have the following INCLUDED NOT INCLUDED Page 2 of 4 1 40 Watt Max Type A Bulb OR 1 9 Watt Max CFL Bulb 1 Lamp A 1 Felt Pad B ...

Page 3: ...gns com Stem Arm A Nut Bolt Remove the Nut from the Bolt on the Stem and adjust the wire over the Bolt Insert the Bolt through the Arm and adjust the angle of Lamp A to the desired position Secure into place by screwing on the Nut on the outside of the Arm Turn the Nut clockwise until fully tightened STEP 1 Carefully unpack the floor lamp and remove all packaging Lay the product on the floor ...

Page 4: ...ugh the Base STEP 5 Screw in Bulb This Lamp has been rated for up to a 40 Watt MAX Type A Bulb NOT Included or a 9 Watt Max CFL Bulb NOT Included Customer Service 800 367 2810 Online www ballarddesigns com Cleaning Care To clean wipe the Fixture with a soft dry cloth Avoid the use of harsh or abrasive chemicals as they may damage the finish Stem Base A B Once assembled peel off the protective cove...

Reviews: