Page 4 of 4
STEP 3:
NOTE: Before starting assembly of this Lamp, be sure it has been unplugged.
Turning the switch off is not sufficient enough.
Screw the Stem into the Base.
NOTE: Hold the Base still and rotate the Stem
to prevent twisting the Cable. Gently pull the
Cable through the Base.
STEP 5:
Screw in Bulb. This Lamp has been rated for
up to a 40 Watt MAX Type A Bulb
(NOT Included) or a 9 Watt Max CFL Bulb
(NOT Included).
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Cleaning & Care:
To clean, wipe the Fixture with a soft, dry cloth.
Avoid the use of harsh or abrasive
chemicals as they may damage the finish
Stem
Base
(A)
(B)
Once assembled, peel off the protective
covering on the Felt Pad (B) and attach
it to the underside of the Base.
STEP 4:
