Page 3 of 4
STEP 2:
NOTE: Before starting assembly of this Lamp, be sure it has been unplugged.
Turning the switch off is not sufficient enough.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
Stem
Arm
(A)
Nut
Bolt
Remove the Nut from the Bolt on the Stem,
and adjust the wire over the Bolt.
Insert the Bolt through the Arm and adjust the
angle of Lamp (A) to the desired position.
Secure into place by screwing on the Nut
on the outside of the Arm. Turn the Nut
clockwise until fully tightened.
STEP 1:
Carefully unpack the floor lamp and remove
all packaging. Lay the product on the floor.
