INSTRUCTIONS
GUS INSTALLATION
RAB Lighting is committed to creating high-quality, aff ordable, well-designed and energy-effi cient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
The fi xture is suitable for indoor applications.
1. Carefully snap out
Lens
one side at a time from
Housing
.
2. Remove
Screws
(2)
from
Refl ector
as shown in Fig. 1
.
Squeeze center of
Refl ector
and release from
Notches.
3.
Pull supply wires from Junction Box (
not supplied
) through
Center Access Hole
of
Housing
as shown in Fig. 1. Use
appropriate UL rated wire connectors as required by code
to make electrical splices to fi xture leads.
4.
Follow appropriate mounting and wiring instructions per
code.
5.
Once connections are made push all wires behind the
Refl ector
.
6.
Replace
Refl ector
and secure with
Screws
(2).
Be careful not
to pinch wires. Hook
Lens
to one side of
Housing
and snap
Lens
into place as shown in Fig. 2.
7.
Remove plastic fi lm from Lens.
WARNING: To prevent wiring damage or abrasion, do not
expose wiring to edges of sharp objects.
GUS- 2FT
End Cap
(2)
Housing
Lens
Refl ector
GUS - 4FT
Screw
(2)
Snap
Squeez
e
Lens
Housing
Notches (4)
Center Access Hole
Knock out for 1/2”
conduit
IMPORTANT
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
RAB fi xtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper grounding
is required for safety. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
WARNING: Make certain power is OFF before installing or maintaining fi xture. No user serviceable parts inside.
Suitable for damp locations.
CEILING MOUNTING
Fig: 1
Fig: 2
