Input the hour and minute for the start/end of the active phase. Confirm your selection with the “OK”
button and to close this sub-menu.
The settings made here apply every day. The camera will not record any images outside of the active
phase.
m.Password Setting
Select “On”if you want to use a password to protect the camera from unwanted access. In the following
sub-menu, you can set a 4-digit combination:
Confirm your selection with the “OK” button and close this sub-menu.
The set number combination must now be entered each time the camera is switched on in SET mode
before the unit can be operated.
If you forget the number combination, please ask the supplier for firmware to reset it to its factory default
settings.
