During the selected interval, the camera will not record any images or videos. This prevents the memory
card from being filled up with too many recordings of the same event. You can select between 3 seconds
to 60 minutes.
9.PIR Sensitivity
The sensitivity of the main motion sensor is set here. For interior areas and environments with little
interference, such as branches blowing in the wind, select“High”. Select“Medium”for exterior areas and
environments with a normal amount of interference, and select“Low”for environments with a high level
of interference. The temperature can also affect the sensitivity. The“High”setting is suitable for warm
ambient temperatures, whereas“Low”should be selected for cold environments.
10.Date stamp
Here you can choose whether to save your photos with a time stamp.You can choose whether the stamp
consists of the time and date or just the date.
11.Timer
Select“On”if the camera should only be active during a certain time period. In the screen menu that
subsequently appears, you can then set the start and end time for the active phase:
