BDM 400 Microphones
Operating Instructions
10
BDM400 Operation Manual issue 10
2.6 W
ALL
M
OUNTING
O
PTION
(BDM3WB)
The Wall Mounting option (product code BDM3WB) allows any
of the BDM 400 Microphones to be wall mounted.
The BDM3WB is separate back plate that is secured to the wall.
The overall dimensions and the positions of the mounting holes of
the back plate are shown in Figure 2.5
Figure 2.5 — Mounting hole positions on BDM3WB
2.6.1 Installation Instructions
1. Mount the back plate on the wall.
2. Remove one of the side panels of the microphone.
3. Slide the microphone over the back plate.
Ensure both the upper and lower raised edges of the back
plate slide securely into the corresponding mounting slots in
the extrusion of the base of the unit.
These slots are shown in Figure 2.6.
