BDM 400 Microphones
Operating Instructions
BDM400 Operation Manual issue 10
5
2 Installation
2.1 BMS8 T
ERMINATION
B
OX
The BDM 400 Microphones are designed to allow simple
installation using the minimum of system cabling.
All microphones use a single RJ45 (CAT5 network) connection,
which is usually terminated to a local wall mounted BMS8
Termination box.
Figure 2.1 — Typical BMS8 Termination Box
C
AUTION
The BMS8 Termination Box has a standard RJ45 socket to allow
use of a standard CAT5 network cable to connect to the
microphone.
Care must be taken to ensure this socket is not used for any other
equipment since it may be damaged if connected.
