BDM 400 Microphones
Operating Instructions
18
BDM400 Operation Manual issue 10
3.6.2 Setting Mic Address (using Type 1 protocol)
The unit must be set to the correct Mic Address to allow
monitoring of communications between the mic and the router,
and also to identify the mic if the “Listen In” function is selected.
To set the Mic Address, determine the physical input that the
microphone is to be connected to, and enter the corresponding
value shown in Table 3.3.
The firmware within the microphone uses the Mic Address and
the Type 1 protocol to determine the correct “Channel Setting”.
The Type 1 protocol is compatible with BVR20 & BVR16M,
BVRD2M and CANBUS modules.
Table 3.3 — Mic Addresses using Type 1 protocol
Mic Address
BVRD2M
Physical Input
BVR20 Physical
Input
Channel
Setting
1
1a
1 (FM 1)
1
2
2a
2 (FM 2)
2
3
3a
3 (FM 3)
3
4
4a
4 (FM 4)
4
5
1b
1 (PM 1)
5
6
2b
2 (PM 2)
6
7
3b
3 (PM 3)
7
8
4b
4 (PM 4)
8
9
9
9 (PM 1)
9
10
10
10 (PM 2)
10
11
11
11 (PM 3)
11
12
12
12 (PM 4)
12
13
13
13 (PM 5)
13
14
14
14 (PM 6)
14
15
15
15 (PM 7)
15
16
16
16 (PM 8)
16
N
OTE
:
If the Protocol is changed then the Mic Address MUST
BE RE-ENTERED or the Channel Setting may be incorrect.
