Baldor Flex+DriveII, Operating Manual

Page: 17 / 42

Basic Demonstrations 4-3
MN1917
4.2 Demonstration files
For demonstration purposes, a number of files are included on the CD-ROM. These include tables and sample
applications for each type of demonstration unit, whether it is a Flex+Drive
II
or MintDrive
II
or designed for 115V or
230V operation. When selecting files for demonstrations, it is very important to use the correct set of files for your
demonstration unit. The files should be installed before demonstration begins:
4.2.1 Preparation
1. Open Windows Explorer and locate the Demonstration Units folder on the CD.
2. Copy the folder to your hard disk.
You must now download the parameter table file that you previously saved in section 3.2.3. However, if you are
working through the manual in sequence, and have not used Fine-tuning or adjusted any other parameters, this step
is not necessary.
3. In WorkBench v5 choose Tools, Parameter Table, Download... from the menu.
4. Select the parameter file and click Open .
5. In the dialog box that appears, click Yes .
The parameter table file will now be downloaded to the Flex+Drive
II
. This may take 1-2 minutes.
4.2.2 Opening Mint (.mnt) program files
When selecting files for demonstrations, it is very important to use the correct files for your demonstration unit.
1. In the Toolbox, click Application
then click the Edit & Debug icon.
2. Important! Before loading a program file, close any
editing windows used by a previous demonstration.
This will avoid possible confusion about which editing
window’s code belongs to the current demonstration.
3. On the menu, choose File, Open File...
4. Carefully locate the correct subfolder for your demonstration unit.
Locate the required file and click Open .