Section 1
General Information
4-10 Programming & Operation
MN715
Changing Parameter Values with a Security Code in Use
Action
Description
Display
Comments
Apply Power
Keypad Display shows this
opening message.
Logo display for 5 seconds.
If no faults and programmed for
LOCAL operation.
Display mode. Stop LED on.
Press PROG key
Enter program mode.
Press
or
key
Scroll to Input block.
Press ENTER key
Access Input block to change
Operating Mode setting.
L: shows parameter is Locked.
Press ENTER key
When security on, parameter
values cannot be changed.
Press
key
Enter the Access Code .
Example: 8999.
represents blinking cursor.
Press ENTER key
Press
or
key
Scroll to make your selection.
Press ENTER
Save selected parameter
P: will change to L: after you
return to Display mode for longer
than the time specified in the
Access Time parameter.
Press
or
key
Scroll to Menu Exit.
Press ENTER key
Returns to Input block.
Press DISP key
Return to Display mode.
Typical display mode.
Note: Please record your access code and store it in a safe place. If you cannot
gain entry into parameter values to change a protected parameter, please
contact Baldor. Be prepared to give the 5 digit code located on the lower right
side of the Keypad Display at the Enter Code prompt.
