Owner’s Manual Baldertech Balder
| Baldertech 21
Manual footrests
1. The angle of the footrest plate is adjusted undoing the
screws (1) on the respective footrest plates and moving
the footrest plate to the required position.
4.2.3. FOOT SUPPORT ANGLING
Electric footrest:
The angle of electric foot supports is adjusted using a joystick. See section 5.2.4 on the use of
the joystick.
Manual footrests
1. Remove the locking clip (1) beneath the seat.
2. Move the foot supports (2) to the correct position.
3. Tighten the locking clip (1).
4. Repeat the same procedure for the other foot support.
4.2.4. ADJUSTING THE WIDTH BETWEEN THE FOOT SUPPORTS
Manual footrest
1. Loosen the attaching screw (1).
2. Move the foot supports sideways.
3. Tighten the attaching screw (1).
4. Repeat the same procedure for the other foot support.
