Owner’s Manual Baldertech Balder
| Baldertech 13
WARNING
Situations who requires service such as programming, mechanical
complex parts, actuators, motors and devices who can affect the safety,
has to be carried out by authorize service personnel.
3.2.1. JOYSTICK
The chair is supplied with a programmable joystick. This joystick is programmed by the man
-
ufacturer depending on the specifications of the chair. The electrical functions are controlled
using the control panel or external panel. Upon activation of the ON/OFF button, the wheelchair
turns into drive mode. Driving directions and control of seat adjustment are carried out by using
joystick and buttons on the control panel. Programming of the control system can only be car
-
ried out by authorized Baldertech service personnel. Incorrect programming can lead to uncon
-
trolled and/or unstable driving characteristics.
3.2.1.1. Dolphin joystick
1
System status / indicator lamp
9
Right footrest / footrest
angle
2
Battery indicator *)
10
Seat tilt
3
On/off switch
11
Key function (sensor)
4
Right indicator (accessory)
12
Left footrest / length
compensation
5
Program selection display
13
Seat back angle
6
Horn
14
Hazard warning lights
(accessory)
7
Lights (accessory)
15
Program selector
8
Seat raise
16
Left indicator (accessory)
*) 3 red, 4 yellow and 3 green LEDs will be on when the battery is at full capacity. These will gradually go out as the
remaining battery capacity is reduced.
