22
Owner’s Manual Baldertech Balder
| Baldertech
4.2.5. REMOVING AND PIVOTING OUT THE FOOT SUPPORTS
NOTE
Applicable to manual foot supports.
•
The foot support can be pivoted out by lifting it up from the attaching bracket and pivoting it out.
•
The foot support can be lifted off by lifting it up and off the attaching bracket.
4.3. Adjusting the joystick
For optimum comfort, it is important for the joystick to be positioned correctly in relation to the
arm of the user.
Balder Finesse and Junior
1. Undo the screws (1 and 2).
2. Adjust the location of the bracket according to how far
forward you want the joystick to sit on the armrest.
3. Tighten the screws (1 and 2).
NOTE
You have to undo both screws in order to adjust the joystick forwards and back, but to angle
merely undoing the screw (2) using a star grip is sufficient.
4.4. Adjusting the swing away for joystick (optional extra)
NOTE
You can lower the joystick by a maximum of 20 mm from its highest position.
NOTE
After adjusting it, you must check that the swing away for joystick can be pivoted without com
-
ing into contact with other elements of the chair, and that cables are able to move freely.
NOTE
When you adjust the stop point, you must make sure you do not remove the seal.
Tightening the swing away
1. Move the joystick carefully while tightening the hex screw
(1).
2. Stop when you feel the joystick becoming fixed in posi
-
tion.
NOTE
Do not turn the adjusting screws so far that they bottom out.
