16
Owner’s Manual Baldertech Balder
| Baldertech
3.2.4.
ATTENDANT CONTROL (OPTIONAL)
All Balder chairs are available with attendant control. This guide describes a standard attendant
control. See also section 5.4.1 for more information.
Attendant control
1. Fixing bracket
2. Panel for electrical functions
3. Ring for moving the wheelchair forwards or backwards.
4. Speed regulator
5. Ring for turning the chair
6. Switches for changing the attendant control angle
7. Rotary switch for selecting whether the user or the es
-
cort is to control the chair
3.2.4.1.
Fitting / removal
If the chair is fitted with a removable attendant control, this can be attached/removed as fol
-
lows.
Attendant control:
Fitting:
1. Place the attendant control in the groove at the back of
the chair (1).
2. Tighten the stop screw (2).
3. Connect the cables for the joystick, control panel and if
possible the main circuit switch (4).
4. Change the angle of the attendant control by pulling out
the switches (3) and adjusting it. Release the switches
when the required angle has been attained.
Removal:
1. Remove by loosening the stop screw (2).
2. Disconnect the cables to the joystick, control panel and if
possible the main circuit switch (4).
3. Pull the attendant control out of the groove (1).
2
1
4
3
3
