1. Fix the air motor body in a suitable way and loosen the five screws (D) to remove the air motor
cap (C).
2. Introduce an open end wrench in the milling of the lower part of the air piston . With another
wrench unscrew the air piston nut (1) and remove the parts (1), (2), (3) and (4).
3. Pull the air piston rod downwards until it is completely outside the motor body .
4. Unscrew the spring nut (G) from the motor body and remove the parts (G), (20), (19), (18) and
(17).
5. Unscrew the screws (15) and remove the parts (14), (13), (12), (11), (10) and (9).
1. Follow the procedure for the air motor until the
air piston rod is outside the air motor body.
2. Remove the packing set (22-24) and the O-ring
(21). Replace these parts and clean the seat of
the O-ring.
833039
833038
Kit n
0
Packing seal kit
Air motor kit
9
NOTE
!
It is important that these parts are mounted
in correct order: Place first the O-ring in
its correct position inside the motor body.
Introduce thereafter the big and the small
packing set.
