background image

40940_N

02-08-19

15

Manufactured under one or more of these patents.  U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 

6590188, 6976052, 6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and 

domestic applied for and pending.   All material copyright of Balboa Water Group.

Utilities 

In addition to INFO, The Utilities Menu contains the following:

GFCI  (GFCI Test) 
(Feature not available on CE rated systems.) 

GFCI Test is not always enabled, so it may not appear. This screen allows the GFCI to be tested manually from the panel and 
can be used to reset the automatic test feature. If the GFCI Test Feature is reset, the device will trip within 7 days. (See 
Page 17)

A / B  (A/B Sensor Temperatures)

When this is set to On, the temperature display will alternate to display temperature from Sensor A and Sensor B in the 
heater. 

FALT LOG  (Fault Log)

The Fault Log is a record of the last 24 faults that can be  
reviewed by a service tech.

DEMO  (Demo Mode)

Demo Mode is not always enabled, so it may not appear. This is designed to operate several devices in a sequence in order 
to demonstrate the various features of a particular hot tub. 

Additional Utilities

Summary of Contents for TP600


























Reviews: