40940_N
02-08-19
2
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370,
6590188, 6976052, 6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and
domestic applied for and pending. All material copyright of Balboa Water Group.
Main Menus
Main Screen
P
SET
RANGE
SET
While the Temperature is
still flashing, press Light.
SET
RANGE
READY
RANGE FLTR1
Main Screen
READY
RANGE FLTR1
SET
READY
SET
1
2
Light Cycle if enabled
Power-up Screens
Each time the System powers up, a series of numbers is displayed.
After the startup sequence of numbers, the system will enter Priming Mode (See Page 3).
Waiting a few seconds in the Main Menu
will allow the display to revert to the Main Screen.
Most changes are not saved unless Light is pressed.
Refer to key above.
If Time of Day is not set
“SET TIME” will
appear in this menu.
Indicates Flashing or Changing Segment
Key
A temperature button, used for “Action”
Light or dedicated “Choose” button, depending on control panel configuration
Indicates Alternating or Progressive Message - every 1/2 second
Waiting time that keeps the last change to a menu item.
Waiting time (depends on menu item) that reverts to original setting and
ignores any change to that menu item.
*****
Navigation
Navigating the entire menu structure is done with 2 or 3 buttons on the control panel.
Some panels have separate
WARM
(Up) and
COOL
(Down) buttons, while
others have a single
Temperature
button. In the navigation diagrams
Temperature buttons are indicated by a single button icon.
Panels that have two Temperature buttons (Warm and Cool) can
use both of them to simplify navigation and programming where
a single Temperature icon is shown.
The
LIGHT
Button is also used to
choose the various menus and navigate each section.
Typical use of the Temperature button(s) allows changing the
Set Temperature while the numbers are flashing in the LCD.
Pressing the
LIGHT
button while the numbers are flashing will
enter the menus.
The menus can be exited with certain button presses. Simply waiting for
a few seconds will return the panel operation to normal.
Indicates a Menu Item that
Depends on a Manufacturer
Configuration and
may or may not appear.
