12
Panasonic 0614,
0616
Penney 0240
Philips 0739,
0618
Profitronic 0240
Proscan 0060
RCA 0060,
0240
ReplayTV 0614,
0616
Samsung 0240,
0889
Sanyo 0240
Shogun 0240
Sonic Blue
0614, 0616
Sony
0032, 0240, 0636
Tivo
0739, 0618, 0636
TMK 0240
Totevision 0240
Unitech 0240
Videosonic 0240
Wards 0060,
0240
DVD CONTROL, PROGRAMMING
Locate the brand name of your DVD player in the
Setup Codes for DVD Players section below, and
write it in the following space.
DVD Player Brand:
The brands are listed in alphabetical order with the
most popular codes listed first. You will use one
of these codes to program the Dolphin to operate
your DVD Player:
1. Turn on the DVD Player.
2. On the Dolphin, press DVD once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your DVD
Player. If you perform this procedure correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Dolphin at your DVD Player and press
POWER once. The DVD Player should turn off.
If it does not respond, repeat steps 2-4, trying
each code for your brand until you find one that
works. If it still does not work, try searching
for the code (see Searching for Your Code on
page 20).
5. Write your DVD code in the boxes below for
future reference.
■ ■ ■ ■
NOTE: Remember, to use the Dolphin to operate
your DVD Player, press DVD first.