17
CD PLAYER, PROGRAMMING
Locate the brand name of your CD Player in the
Setup Codes for CD Players section below, and
write it in the following space.
CD Player Brand:
The brands are listed in alphabetical order with
the most popular codes listed first. You will use
one of these codes to program the Dolphin to
operate your CD Player:
1. Turn on the CD Player.
2. On the Dolphin, press CD once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your CD
Player. If you perform this procedure correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Dolphin at your CD Player and press
POWER once. The CD Player should turn off.
If it does not respond, repeat steps 2-4,
trying each code for your brand until you find
one that works. If it still does not work, try
searching for the code (see Searching for Your
Code on page 20).
5. Write your CD code in the boxes below for
future reference.
■ ■ ■ ■
NOTE: Remember, to use the Dolphin to operate
your CD Player, press CD first.
CD Players, Setup Codes
Aiwa 0157
Arcam
0157
California Audio Labs 0029
Carver 0157
DKK
0000
DMX Electronics
0157
Genexxa
0032
Harman/Kardon
0157
Hitachi
0032
Integra
0101
JVC
0072
Kenwood 0028
Krell
0157
Linn
0157
Magnavox 0157
Marantz
0029, 0157
MCS
0029
Miro
0000
Mission
0157
Myryad
0157
