bba
TM
3
USER GUIDE 42384 - Rev A
Balboa Water Group | Your Single Source Solution
16
15
PAIR SMART DEVICE
Follow these steps to pair your smart device with the
bba
TM
3 amplifier (D).
1 - Power up spa.
IMPORTANT: All paired devices are erased from
the bba
TM
3 amplifier when power to the spa is
cycled. While the bba
TM
3 forgets your smart device
when the spa power is cycled, your smart device
might not forget the bba
TM
3 amplifier. In this case, an
error message may appear if you try to reconnect.
You may need to have your smart device “forget”
the bba
TM
3 amplifier, and only after that connect
to the bba
TM
3 amplifier again to avoid such error
messages.
2 - Select A/V (A) to enter the Bluetooth screen. A/V
may not appear if control system (E) did not detect the
bba
TM
3 amplifier (D).
3 - Select Power (B) to turn On the bba
TM
3 amplifier. One
of the following messages will appear at the bottom of
the Bluetooth screen.
Discoverable
(C).
BT Not Connected
- “BT” stands for Bluetooth.
BT Connected
- If this appears, go to step 7.
4 - Turn On the Bluetooth function on your smart
device.
5 - On your smart device, click search for Bluetooth
device. Make sure the smart device is close enough to
the spa tub, so the smart device can pair with the
bba
TM
3 amplifier.
6 - On your smart device, select “BBA Spa Music” from
the pairing list. If “BBA Spa Music” does not appear,
repeat steps 1 - 5.
7 - Some smart devices will connect automatically,
but with others you will need to select “Connect.”
Once connected, play music on your smart device.
If the music plays from the speakers in the spa, the
connection is complete.
C
B
spaTouch
TM
1, TP900, TP800
A
bba
TM
3 Amplifier
Control System
D
E
SELECT INPUT MODE
The following input modes are available: Bluetooth,
Line In. All control systems are equipped with Bluetooth
mode. However, control systems may or may not have
Line In, as this input mode is optional.
Follow these steps to select the input mode of the
bba
TM
3 amplifier.
1 - Select A/V to enter the Bluetooth screen (A).
2 - Confirm that the bba
TM
3 amplifier is turned On (C). If
it is turned Off, these buttons will be dim (B).
3 - Select Source (D) and activate an Input mode.
If you activate Bluetooth mode, one of the following
messages will appear at the bottom of the
Bluetooth screen (E).
Discoverable
(E)
BT Not Connected
- “BT” stands for Bluetooth
BT Connected
If you activate Line In mode, this will appear at the
bottom of the Bluetooth screen (G).
Line In
Only audio settings such as volume are available when
using Line In (G).
The terms “Line In” (G) and “Aux In” (H) refer to the
same thing.
spaTouch
TM
1, TP900, TP800
A
D
E
F
G
B
C
NOTE: Even though the word USB
may appear here (G) as an input
mode option, USB is not available
with the bba
TM
3 amplifier.
Left
Right
Aux In
H
bba
TM
3 Amplifier
NOTE: bba
TM
3 operates up to 100
feet in open air. Ranges vary as
they are dependent on installations
and environments.
