BALAY 3HW459X, Instruction Manual

Page: 9 / 32

9
2.
Turn the rotary selector to set the microwave power setting.
3.
Press the 0 button and set the cooking time using the rotary
selector. Set the oven.
4.
Press the ‚ button and set the type of heating using the
rotary selector.
5.
Press the
[
button and use the rotary selector to set the
temperature.
6.
Press the
@
button to start the appliance.
Note:
You can also set the oven first, and then set the
microwave using the ! button.
Changing the temperature and cooking time
Once the appliance has started, you can change the
temperature and cooking time at any time:
Press the
[
button and change the temperature using the
rotary selector.
Press the 0 button and turn the rotary selector to change the
cooking time.
To delete all settings, press and hold the
@ button for
4 seconds. You can now make new settings.
Setting a later end time
See the section entitled Time-setting options - Setting a later
end time .
Pause
Press the
@
button or open the appliance door. The appliance
interrupts operation. The
@
button flashes.
Close the microwave door and press the
@
button to continue
operation.
When the cooking time has elapsed
A signal sounds.
Press the
0
button to cancel the signal before it sounds.
Open the appliance door and carefully remove the cookware
with oven gloves.
Press the # button to switch off the appliance.
Cancelling operation
Press the
#
button to cancel operation and switch off the
appliance.
Time settings
You can call up the time settings using the 0 button. You have
the following options:
When the oven is switched off
■
Q
= Set timer
■
0 = Set clock
When the oven is switched on
■
Q
= Set timer
■
x = Set cooking time, if necessary
■
y = Set a later end time, if necessary
■
0
= Show clock
Short audible signal
If you cannot change or set a value, you will hear a short
audible signal.
Set timer
The timer runs independently of the oven. You can use it as a
kitchen timer and set it at any time.
1.
Press the
0
button. The arrow is pointing to the
W O
timer
symbol.
2.
Set the running time for the timer using the rotary selector.
You will then see the timer counting down on the clock display
for a few seconds. Then it switches to the background. The
W
symbol indicates that a timer is counting down.
When the time has elapsed
A signal sounds. 00:00 W O appears in the clock display. You
can cancel the signal early by pressing the
0
button.
Calling up the time for the timer
Press the
0
button. The time is displayed for a few seconds.
Cancelling the timer time
Press the
0
button and turn the time back to 00:00. The timer
time is cancelled after a few seconds.
Changing the timer time
Press the
0
button. Change the time for the timer using the
rotary selector.
Setting the cooking time
If you set the cooking time for your dish, operation stops
automatically once this time has elapsed. The appliance stops
heating.
Prerequisite: The type of heating and temperature must be set.
Example in the diagram:
Setting for
%
Top/bottom heating, 180 °C, cooking time
45 minutes. Operation has not yet been started.
1.
Press the 0 button twice.
The cooking time xO is selected.
2.
Set the cooking time using the rotary selector.
The cooking time is adopted after a few seconds. The
brackets around the cooking time disappear. The
xO
symbol lights up.
3.
If the operation has not yet started, press the @ button.
LH I NJO
LH I NJO
¡$
LH I NJO
¡$