background image

 

INSTALLATION AND OPERATING INSTRUCTIONS 

FLOOR MODEL GAS DECK OVENS 

SERIES: 100, 200, 300, 400, 600, 800, 125 and 805 

 

INTENDED FOR OTHER THAN HOUSEHOLD USE 

RETAIN THIS MANUAL FOR FUTURE REFERENCE 

OVEN MUST BE KEPT CLEAR OF COMBUSTIBLES AT ALL TIMES 

 

IMPORTANT INSTRUCTIONS 

After the gas supply has been connected to your unit, it is extremely important to check piping for 
possible leaks. To do this, use soap and water solution or solutions which are expressly made for this 
purpose. 

DO NOT USE

 

matches, candles, flames, or other sources of ignition since these methods are extremely 

dangerous. Post in a prominent location instructions to be followed in the event you smell gas. Obtain 
these instructions from your local gas supplier.  

 

FOR YOUR SAFETY 

Do not store or use gasoline or other flammable vapors 

and liquids in the vicinity of this or any other appliance. 

  

WARNING 

Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury 
or death. Read the Installation, Operating and Maintenance Instructions thoroughly before installing or 
servicing this equipment. 
Initial heating of oven may generate smoke or fumes and must be done in a well ventilated area. 
Overexposure to smoke or fumes may cause nausea or dizziness. 

 
Note:

 Only 

Pizza

 or 

Bread

 can have direct contact with ceramic decks. All other food products must be 

placed in a pan or container to avoid direct contact with ceramic decks. 

 

This equipment has been engineered to provide you with year round dependable service when used 

according to the instructions in this manual and standard commercial kitchen

 

practices.

 

DESIGN

CERTIFIED

11/00 Form #U4114A

 

BAKERS PRIDE OVEN CO., INC

30 Pine Street 

New Rochelle, NY 10801 

(914) 576-0200  Phone                                                                           (800) 431-2745  US & Canada 
(914) 576-0605  Fax                                                                      www.bakerspride.com  Web Address 

 

1

Summary of Contents for Vantage 100 Series













Reviews: