background image

 
 

389D000 Rev B 

7

 

 

 

 III - PROPER CABINET USE 

 

CAUTION 

A Biological Safety Cabinet is a valuable supplement to, but not a replacement for, good laboratory 
technique and safe practice. 

If the operator does not operate the cabinet correctly, it may not provide an adequate protective 
barrier. To ensure personnel protection, product protection, and environmental protection the 
cabinet must be operated per the manufacturer’s instructions. 

The facility industrial hygienist or safety officer shall ensure that: 

 

The cabinet is appropriate for all operations and procedures to be performed. 

 

All operators are thoroughly trained and competent regarding cabinet operation and all procedures they 
are required to perform. 

 

That the cabinet operation, procedures, and operators are monitored at regular intervals to ensure that 
safety is maintained. 

A good reference source is The Biosafety In Microbiological and Biomedical Laboratories (BMBL) 5

th

 edition 

published by the U.S. Department of Health & Human Services as HHS Publication No. (CDC) 21-1112 as an 
advisory document for safe work practices. 
 
Baker biosafety cabinets are designed for continuous operation. It is recommended that the blower be left on at 
all times to provide containment and keep the interior work area clean and free of particulates.  
 

Operation and Controls 

The operator controls with indicators are arranged on the front electrical panel of the cabinet. A number of 
switches are arranged in a single membrane switch assembly. [Reference Figure 3] 

 
 
 
 
 
 
 
 
 

 

 

          

Figure 3: Operator Controls 

Blower 

This pushbutton switch controls the cabinet blower. Pressing the Blower pushbutton switch will turn the blower 
ON. A green indicator light located below the switch will illuminate when the switch is on. Pressing the Blower 
pushbutton switch when the blower is running will turn the blower OFF. If the cabinet blower is turned off, the 
Fluorescent Lights will turn off. 

ALARM

Alarm Mute / Reset 

 Sash Level Alarm 

Blower 

On / Off  

Auxiliary Outlets 

On / Off 

Fluorescent Light 

On / Off 

UV Light 

On / Off 

Indicator 

Lights 

Summary of Contents for SterilGARD e3 Series





















Reviews: