Communications Options User’s Guide
27
Chapter 2. Modbus Over Ethernet Communications 1
2. Modbus Over Ethernet Communications 1
IMPORTANT:
These setup instructions apply only when using option card
703-1476-05, rev. A
, or option card
703-1477-03,
rev. C
and
lower
.
2.1
Introduction
This document provides instructions for setting up a flowmeter equipped with
Modbus Over Ethernet (Modbus/TCP)
communications. To apply these procedures, the flowmeter must have the option card installed. The option card,
based on the features that were ordered, will have many components. (See the examples in Figure 8 and Figure 9).
Figure 8: DF Ethernet Option Card
Figure 9: XMT Ethernet Option Card
Note:
To install an option card, consult the user’s manual(s) which apply to your instrument.
