Baker Hughes Panametrics Aurora RM, Manual Addendum

Page: 9 / 17

2 Aurora Rack Mount Manual Adendum
Orientation
During operation, Aurora RM should be positioned on a flat surface or in a 19" rack with the top surface facing upward
and at an agle no greater the 15° from horizontal.
The wetted materials in the Aurora RM include 316 Stainless Steel, flexible Polypropylene tubing (Parker Part No.
PP-43-0500), and Fluorocarbon (Viton®) seals. Please check with a Panametrics Applications Engineer on the
chemical compatibility of your process gas with these materials.
1.3. Basic Features
• Rugged, lightweight design (< 45 lbs) with front handles and rails on black anodized rack-mount enclosure for
ease of mounting into a 19" rack.
• Simple intuitive user interface via LCD display and 6-key push-button keypad.
• Optical response: < 2 seconds after horizontal flow cell is purged
• Dry down from ambient (~5000 PPMv) to <10 PPMv in seconds, which enables very fast recovery from dehydration
system upsets.
• Direct readout in PPMv, dew/frost point (°C, °F), density (lbs/MMSCF, mg/m
3
) or vapor pressure (kPa, mmHg).
• Calculation and readout of process pressure dew point with user programmable constant or remote Modbus
input for the process pressure.
• Three 4 - 20 mA outputs, two RS-232/485 MODBUS RTU for connection to SCADA or plant monitoring system, and
one Ethernet port with MODBUS/TCP.
• Supplied with AuroraView software for remote configuration, data logging and data retrieval capacity.
• Provided with 1 standard NIST traceable calibrations in 100% Nitrogen and 5 custom calibrations that can be user
defined based on the application.
• In conformance with IEC 60825-1 Edition 2.0 Safety of Laser Products
CAUTION!
The Aurora rack mount configuration is intended for safe areas only and is NOT
suitable for use in hazardous areas.