2 | Baker Hughes
Copyright 2023 Baker Hughes Company. All rights reserved.
1. It is the end user's responsibility to ensure properly loaded and/or supported piping to avoid undesired stresses on the
product which may result in damage to the product, loss of containment, or loss of functionality and resulting unsafe
states or conditions.
2. It is the end user's responsibility to correctly identify end locations and place product in areas that may contain
explosive atmospheres. The failure of properly following the test, installation, maintenance and/or disassembly/assembly
instructions may result in a compromised product which in turn could result in an uncontrolled/unexpected loss of
containment and release of pressure.
3. It is the end user’s responsibility to take appropriate actions to ensure that site personnel who are performing
installation, commissioning, and maintenance have been trained in proper site procedures for working with and around
Baker Hughes supplied equipment, per Safe Site Work Practices, are the end user's responsibility.
4. The failure of properly following the test, installation, maintenance and/or disassembly/assembly instructions may result
in a compromised product which in turn could result in an uncontrolled /unexpected loss of containment and release
of pressure. It is the responsibility of the person conducting the tasks listed above to take great care in following such
procedures.
5. It is the end user's responsibility to:
• Recognize and safely contain any leak.
• Ensure proper Personal Protective Equipment is available and used.
• Follow Proper lifting techniques / equipment / procedures, per Safe Site Work Practices.
6. Proper Lockout/Tagout of energy sources prior to maintenance, per Safe Site Work Practices, is the end user's
responsibility. This includes any potential control signals or circuits that may have a remote or automated control
function over any product. Instructions to properly release spring stored energy included in IOM.
7. After installation or maintenance, it is the end user's responsibility to ensure the equipment has been properly inspected
and returned to proper condition before being returned to service.
