background image

Copyright 2023 Baker Hughes Company. All rights reserved. Baker Hughes provides this information on 
an “as is” basis for general information purposes. Baker Hughes does not make any representation as to 
the accuracy or completeness of the information and makes no warranties of any kind, specific, implied or 
oral, to the fullest extent permissible by law, including those of merchantability and fitness for a particular 
purpose or use. Baker Hughes hereby disclaims any and all liability for any direct, indirect, consequential or 
special damages, claims for lost profits, or third party claims arising from the use of the information, whether 
a claim is asserted in contract, tort, or otherwise. Baker Hughes reserves the right to make changes in 
specifications and features shown herein, or discontinue the product described at any time without notice or 
obligation. Contact your Baker Hughes representative for the most current information. The Baker Hughes 
logo, Masoneilan and Lo-dB are trademarks of Baker Hughes Company. Other company names and product 
names used in this document are the registered trademarks or trademarks of their respective owners.

BHMN-21000-IOM-19821F-1123          11/2023

Direct Sales Office Locations

bakerhughes.com

Tech Field Support & Warranty:

Phone: +1-866-827-5378

[email protected]

Find the nearest local Channel Partner in your area:

valves.bakerhughes.com/contact-us

valves.bakerhughes.com

Summary of Contents for Masoneilan 21000 Series









































Reviews: