Copyright 2010 Baker Hughes Company.
26 | TERPS Instruction Manual–English
Command:
n/a
Query:
<SPACE>E,?<CR>
Reply:
<Reference Frequency><CR>
Query:
<SPACE>*E,?<CR>
Reply:
Reference Frequency = <Reference Frequency>kHz<CR>
6.8.2 L - Load Calibration Coefficients
This direct mode only command queries the calibration coefficients.
Command:
n/a
Query:
<SPACE>L,?<CR>
Reply:
<Coefficient0,0>,<Coefficient 0,1>,<Coefficient0,2>,<Coefficient
0,3>,<Coefficient 0,4>,<Coefficient 1,0>, … ,<Coefficient
5,3>,<Coefficient 5,4>,<Frequency Offset>,<Diode Offset>,<Calibration
Date><CR>
Query:
<SPACE>*L,?<CR>
Reply:
K[0][0] = <Coefficient 0,0><CR>
K[0][1] = <Coefficient 0,1><CR>
K[0][2] = <Coefficient 0,2><CR>
K[0][3] = <Coefficient 0,3><CR>
K[0][4] = <Coefficient 0,4><CR>
K[1][0] = <Coefficient 1,0><CR>
…
K[5][3] = <Coefficient 5,3><CR>
K[5][4] = <Coefficient 5,4><CR>
<CR>
Frequency Offset (X) = <Frequency Offset> Diode Offset (Y)= <Diode
Offset><CR>
Serial Number = <Serial Number> Calibration Date= <Calibration
Date><CR>
Curve Fit = <X order> x <Y order><CR>
<CR>
Type <CR> to continue<CR> (Waits 20 seconds or for CR)
6.8.3 T - Analogue/Digital Converter Set-up
This direct mode only command queries the internal analogue to digital converter used to
measure the ambient temperature value.
Command:
n/a
Query:
<SPACE>T,?<CR>
