Baker Hughes Apollo 3, User Manual

Page: 25 / 277

Copyright 2020 Baker Hughes Company. All rights reserved. Page 25 of 277
information that Apollo gathers is logged and stored in the HMI or the information can be communicated
to a remote monitoring site.
The 4 electronic assemblies that make up the Apollo Intelligent Controls System are the Apollo HMI (Human
Machine Interface), the Apollo I/O Board Assembly, the RSTi Expansion I/O Module and the Downhole
Sensor Interface (DSI) Assembly.
3.2 Hardware
3.2.1 Apollo HMI (Human Machine Interface)
The Apollo HMI functions as both a graphical user interface and as the system master controller.
It also functions as a motor drive interface, a flash file-based database, and as an interface to the
other control boards that comprise the Apollo system. Features include:
• Full Color Graphical Display with Operator Keypad
• Run/Stop/Fault Lights (LEDs)
• USB Port
• ModBus Communications Port (SCADA Interface)
• Ethernet Port (Supports Wireless Router or Cell Modem for SCADA or Remote User Interface)
• Drive Communications Port
• Apollo Sub-System RS-485 Interface (Apollo I/O Board, Osiris Downhole Sensor Interface,
RSTi Module)
Figure 2: Apollo HMI