4
Front Wheel Assembly
. Starting with left side (left side is defined as
left side of mini bike while sitting in riding
position), slide axle through - fork, 2- small
wheel spacer , 3- wheel. 4- large wheel spacer,
5- fork, 6-washer. Note: Place large spacer on
right side of wheel and smaller spacer on left
side of wheel .
2. Place castle nut on end of axle and tighten
snug. Once tight, insert cotter pin and bend
over ends with a pair of pliers.
WARNING
Riding minibike without cotter pin installed on front and rear wheel axles could be
hazardous
Riding minibike without cotter pins installed increases the risk of front and/or rear
wheels coming loose which could result in severe injury or death.
Before riding, make sure front and rear axle cotter pins are installed.
Washer
Castle Nut
Cotter Pin
Castle nut cover
Large wheel spacer right side
Small wheel spacer left side.
Cotter Pin
Bend cotter pin end
3. Place rubber castle nut cover over nut and
cotter pin
Castle nut cover
Left
Right
Axle
