Baja DB30 Setup Instructions Download Page 8

Page: 8 / 8

2. Fill gas tank as specified in

owners manual.

. Drain packing oil and fill with correct

amount and type of oil as specified in

owners manual

3. Refer to owners manual for starting

instructions

WARNING!

This Mini Bike may be shipped with packing oil

in engine. This oil should be drained and re-

placed with new engine oil as described in the

owners manual. Never attempt to start engine

without first replacing engine oil with proper

amount and grade as described in owners

manual.

Gas and Oil

Oil Drain plug

Oil Fill Plug

-888-863-2252

If you have any questions

Please call Toll Free

Summary of Contents for DB30

Page 1: ...arton top Rev A 1 Remove set up instructions owners manual and parts 2 Locate white moisture absorbing packet and discard Note This packet is for shipping purposes only Set Up Instructions DB30 Removal from crate ...

Page 2: ...acers Washer 12mm Castle Nut Cotter Pin Castle nut cover Front Wheel 12mm Front Axle bolt Front Tire and Hardware Front fork assembly Hardware 10mm X 165mm Front Fork Bolt 10mm Front Fork Lock Nut 2 large Washers 2 Beveled Washers 8mm X 25mm Bolts Cable Ties Yellow Front Reflector Red Rear Reflector ...

Page 5: ...portion of fender is over wheel Install with rubber grommet between frame and fender Tighten with 8mm Nuts and 8mm X 25mm bolts provided Torque bolts to 15 ft lbs 8mm Lock nuts Rubber Grommets 8mm X 25mm bolt Fender Orientation Larger part toward front over wheel ...

Page 7: ...inibike one on each side and one on the rear Screw each reflector onto the welded bracket clockwise CW 2 There are two yellow reflectors These reflectors need to be attached to the front of the minibike one on each side Screw each reflector onto the welded bracket clockwise CW Yellow Front Reflector Red Rear Reflector ...