background image

19

SAFETY GEAR

A DOT approved motorcycle helmet is the most important part of you safety 

gear.  A DOT approved motorcycle helmet can help prevent a serious head 

injury.  Choose a helmet that fits snugly.  Motorcycle dealers can help in 

selecting a good quality helmet which fits properly.

You should wear eye protection when you ride.  If a rock or a branch hits your 

eyes, you could be severely injured.  Wear goggles or a face shield.

Wear proper clothing when you ride.  The proper clothes can protect you from 

injury.  Wear a good pair of gloves, strong boots that are over the ankle, long 

pants, and a long sleeve shirt.

Operating this Go-kart without wearing an approved DOT motorcycle 

helmet, eye protection, and protective clothing could be hazardous.

Operating without an approved DOT motorcycle helmet or eye protection 

increases your chances of a severe head injury or death in an accident.  

Operating without protective clothing also increases your chances of 

severe injury in an accident.

Always wear an approved DOT motorcycle helmet which fits properly.  

Always wear eye protection (goggles or face shield).  You should also 

wear gloves, boots, long sleeve shirt or jacket, and long pants.

 

WARNING

Summary of Contents for BR150-D
























































Reviews: