Baja motorsports BR150-D Owner'S Manual Download Page 6

Page: 6 / 55

This off-road product IS NOT A TOY AND CAN BE HAZARDOUS TO OPER-

ATE. This product handles differently from other vehicles including ATV’s and

motorcycles. A collision or rollover can occur quickly, even during routine

maneuvers such as turning and riding on hills or over obstacles.

To help you make informed decisions about safety, you will find provided in

this manual operating procedures and other safety procedures which must

be followed. In addition to the safety information in this manual, you will find

safety labels on the product. FOLLOW ALL WARNING BOTH IN THIS MANUAL

AND ON THE PRODUCT.

Information which is particularly important is distinguished in this manual by

the following notations:

FAILURE TO FOLLOW WARNING INSTRUCTIONS

COULD RESULT IN SEVERE INJURY OR DEATH

TO THE OPERATOR OR PASSENGER, A

BYSTANDER OR A PERSON INSPECTING OR

REPAIRING THE PRODUCT.

CAUTION INSTRUCTIONS ARE PROCEDURES TO

PREVENT DAMAGE TO THE VEHICLE OR INJURY

TO THE OPERATOR OR PASSENGER, A

BYSTANDER OR A PERSON INSPECTING OR

REPAIRING THE PRODUCT.

NOTE: A NOTE provides key information to make procedures easier or

clearer.

NOTICE TO USERS

WARNING

CAUTION

Summary of Contents for BR150-D
























































Search results

Summary of Contents for BR150-D

Reviews:

Brands by name

Popular brands

Baja motorsports BR150-D, Owner'S Manual

Search results

Summary of Contents for BR150-D

Reviews:

Brands by name

Popular brands