manualshive.com logo in svg

Baja motorsports BR150-D, Owner'S Manual

Share
Download
Baja motorsports BR150-D Owner'S Manual Download Page 39

36

TIRES

Front

Rear

Size

19x7-8

22x10-10

The Go-kart is equipped with low pressure tubeless tires of the 

size listed below:

Tire Tread Condition

Tire Air Pressure

Check the air pressure in all tires before riding.  Improper air pressure would 

effect handling, steering response, traction, tire life and rider comfort.  Be 

sure that the tires are inflated to the pressures shown below.  Tire pressure 

should only be measured or adjusted when the tires are cold.

Operating this Go-kart with improper tires, or even improper tire air 

pressure could  

be hazardous.

If you use improper tires or improper tire air pressure, you may lose control 

of the Go-kart.

Always use the size and type tires specified.  Always maintain proper tire 

air pressure as described in this section.

Using worn tires could be hazardous.

The traction of the vehicle will be decreased.  This increases your risk of having an 

accident.

Replace the front and rear tires when the depth on the tread is 4.0 mm (0.16 in) or less.

3.0 mm (0.12 in)

CAUTION

 

WARNING

Recommended pressure

Front

96 kpa (14 psi)

Rear

96 kpa (14 psi)

!

Summary of Contents for BR150-D
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands