INSTALLATION
SETUP/PHYSICAL INSTALLATION
2 - 6
I-E96-415A
®
Cable Installation
Remove (pull off) the front cover of the termination module
before trying to install cables. Use the following procedures
when installing cables.
NKCL01 AND NKCL02 CABLES
This cable connects, using NKTL01 adapter cables, one IRL
module to another IRL module. To install the cable:
1. Connect one end of the cable to the NKTL01 cable con-
nected to one of the IRL modules.
2. Connect the other end of the cable to the NKTL01 cable
connected to the other IRL module.
NKPL03 AND NKPL04 CABLES
This cable directly connects one IRL module to another IRL
module (see Figure
for an example cable connection). To
install the cable:
1. Connect one conductor from terminal 9 or TB3-3 (depend-
ing on firmware revision of IRL module) of the remote master
processor (RMP) IRL module to terminal 26 or TB4-1 (depend-
ing on firmware revision of IRL module) of the remote slave pro-
cessor (RSP) IRL module.
2. Connect the other conductor from terminal 8 or TB3-2
(depending on firmware revision of IRL module) of the local
(RMP) IRL module to terminal 25 or TB4-2 (depending on firm-
ware revision of IRL module) of the remote (RSP) IRL module.
3. Connect the shield conductor from terminal 10 or TB3-1
(depending on firmware revision of IRL module) of the local
(RMP) IRL module to terminal 27 or TB4-3 (depending on firm-
ware revision of IRL module) of the remote (RSP) IRL module.
CAUTION
Remove modules (slave, master or termination) from their
assigned slots before installing a cable to that slot. Also,
remove stations from their housing before installing a cable to
that housing. Failure to do so could result in damage to the
module or station.
ATTENTION
Retirer les modules (asservi, maître ou carte de raccordement)
de leur position assignée avant d'installer un câble à cette
position. Egalement, retirer les postes de commande de leur
boîtier avant d'installer un câble dans ce boîtier. Des dom-
mages au module ou au poste pourraient résulter d'un man-
quement à cette procédure.
