INTRODUCTION
I-E96-415A
C - 1
APPENDIX C - NDCS03 DIGITAL CONTROL
STATION CONFIGURATION
INTRODUCTION
Figures
and
show the location of the dipshunts,
dipswitches and jumpers used to configure the NDCS03 sta-
tion. Tables
through
give the dipswitch, dipshunt and
jumper settings to configure the station. This information is
provided as a quick reference guide for personnel installing the
NIRL03 termination module. Configuration consists of setting
the analog input type (dipshunt XU16) and control output type
(jumpers J1 and J2) on the bypass board. Setting the station
address (dipswitch S1) and options (jumpers JP1 through JP5)
on the station board is also required. Refer to the
NDCS03 Dig-
ital Control Station
instruction manual for detailed
instructions.
Figure C-1. Bypass Board
1
1
16
2
15
7
10
6
11
5
12
4
13
3
14
8
9
1
CONTROL OUTPUT
JUMPERS
T00505A
J1
J2
XU16
2
2
3
3
ANALOG INPUT
TYPE DIPSHUNT
MANUAL BYPASS SWITCH:
UP = BYPASS OPERATION
DOWN = OPERATION
NORMAL (NOT BYPASS)
