INTRODUCTION
I-E96-317A
B - 1
APPENDIX B - REMOTE LINK (NIRL03)
TERMINATION MODULE CONFIGURATION
INTRODUCTION
The NIRL03 is a module version of the NTRL03 and occupies
one slot in the Termination Panel. An NKTU02 or NKTM01
cable connects the RIO to the NIRL03.
CABLE TERMINATION
Due to transmission line effects, the cables must be terminated
at each end with the characteristic impedance. The J3 jumper
setting on the NIRL03 must match the node position (see Fig-
ure
). Table
illustrates the necessary jumper settings.
Refer to Tables
and
for system cable type and Table
for terminal assignments. Figure
shows cable connec-
tions for the NTRL03 and Figure
shows node positions for
redundant TM connections.
Figure B-1. Node Positions for Non-Redundant TM Connections
NON-REDUNDANT
TM CONNECTIONS
END NODES - TERMINATION
RESISTORS NEEDED
MIDDLE NODES - TERMINATION
RESISTORS BYPASSED
IRL/TRL
IRL/TRL
IRL/TRL
IRL/TRL
TP85111A
