OPERATING PROCEDURES
START-UP PROCEDURES
4 - 2
I-E96-313A
®
START-UP PROCEDURES
The master module controls the start-up of the DSO module; it
is fully automatic. Function Code (FC) 83 in the master module
configuration enables the DSO. Specification 1 (FC 83) is the
slave module address. It must be the same as the address set
on the address dipswitch (S1). The front panel LED (solid
green) verifies that the module is enabled and communicating.
Table 4-1. IMDSO04 Front Panel
LED
Indication
Solid Green
Enabled and communicating with master module
Off
No power or not enabled
Solid Red
Bus fault timer error (
time-out)
