I-E96-207A
vii
Safety Summary
GENERAL
WARNINGS
Equipment Environment
All components, whether in transportation, operation or storage
must be in a noncorrosive environment.
Electrical Shock Hazard During Maintenance
Disconnect power or take precautions to ensure that contact with
energized parts is avoided when servicing.
Special Handling
This module uses Electrostatic Sensitive Devices (ESD).
SPECIFIC
WARNINGS
The module is shipped with the default switches in the open or
non-operable state. The module digital outputs are de-energized
(off) during start-up, during operator selected RESET, configure
mode and for certain failure conditions. (p. 3-2)
Analog outputs always hold last value when the module is put into
configure mode and go to user-selected values during start-up, dur-
ing operator selected RESET, and for certain failure conditions.
These values must be selected by the end user to prevent personal
injury, equipment damage or damage to the product. (p. 3-2)
Do not run these tests while a COM is connected to ANY final ele-
ments. The test produces analog output triangle waveforms from 0
percent to 100 percent. The digital outputs cycle on and off continu-
ously. (p. 3-6)
The module digital outputs are de-energized (off) during start-up,
during operator selected RESET, configure mode and for certain
failure conditions. Configure the control strategy to prevent personal
injury, equipment damage or damage to the product in case digital
outputs de-energize. (p. 4-2)
Analog outputs always hold last value when the module is put into
configure mode and go to user-selected values during start-up, dur-
ing operator selected RESET, and for certain failure conditions.
These values must be selected on the default switch by the end
user to prevent personal injury, equipment damage or damage to
the product. (p. 4-2)
