Bailey Approach SE, Owner'S Manual

Page: 86 / 96

7-39
FITTED EQUIPMENT
HORREX UCS DUO PLISSÉ
Using the UCS Duo Plissé
• It is recommended to move the pull bars
separately, and not when the two pull
bars are connected to each other.
• This will reduce the friction and will make
it easier to use.
• Do not move the pull bars up and down
fast, repeatedly, without a pause interval.
• This can induce high friction and will
generate heat which will reduce the
lifespan of the UCS Duo Plisse.
• When moving a pull bar, it is
recommended to contact the aluminium
profile and not to move the pull bar at the
clicker to avoid breaking the clicker.
• When moving a pull bar, it is
recommended to contact the aluminium
profile in the middle as much as possible.
See the red arrows for reference in the
below picture.
• In case the UCS Duo Plissé will not be
used for a longer period of time, it is
recommended to keep the UCS Duo
Plissé fully opened. This will store the
pleated material inside the plastic
cassette which offers the best protection.
Fig 29
Cleaning the UCS Duo Plissé
• The whole product can be best cleaned
with water only, except from the front side
of the blackout material. The front side of
the blackout material consists of a non-
woven fabric which must not come into
contact with water. This material will
absorb water and the lamination can be
destroyed.
• If there are severe stains on the profiles
or corner caps, a cleaning cream with
micro particles is recommended.
• This cleaner may only be used on the
plastic corner caps, plastic profiles and
aluminium profiles.
Fig 30
Frontside Blackout