Bailey Approach SE, Owner'S Manual

Page: 79 / 96

7-32
FITTED EQUIPMENT
Fig 25
QUICK USER GUIDE COMBI 4 E
OPERATING INFORMATION
Truma Dial Information (see Fig 25)
Warm Weather operation (supplying Hot
water only)
Select gas or electrical operation with the
power selector switch. The yellow LED will
illuminate on the switch to indicate the unit is
operating on 230V.
• Move the rotary switch on the lower
panel to the position just showing the
flame symbol 40degrees or 60 degrees
and the yellow LED should illuminate.
• When the selected water heater
temperature is reached the heater will
shut down and the yellow LED will go
out.
Cold Weather Operation (Blown air heating
and hot water)
• Select gas, electrical or mixed operation
using the power switch. The yellow LED
on the power selector switch will
illuminate to reflect 230 V operation.
• Move the rotary switch on the lower
control panel to the lowest marking
depicting a flame and 60
°
.
• Set the rotary switch to the desired
thermostat setting; the green LED light
will illuminate to show the unit is
operating
Rotary switch
(external ring)
LED fuctional display
Yellow = Electrical
operation
Energy source selection
Rotary switch
(external ring)
LED fuctional display
Green = Operational
Operating mode
LED fuctional display
Red = Fault
Yellow = Heat-up
phase warm water
Room temperature
Electrical
Gas
Elec gas
Warm water
Heat
= 1800 W
= 900 W
= 2000 W / 4000 W / (6000 W)
= Max 2900 W (4900 W)
= Max 3800 W (5800 W)
O
= Water temperature 60ºC
= Water temperature 40ºC
= OFF
= Without controlled
water temperature
= With controlled
water temperature 60ºC