Bailey Approach SE, Owner'S Manual

Page: 73 / 96

7-26
FITTED EQUIPMENT
Explanation:
The refrigerator is equipped to operate on mains
power, 12V DC or liquefied gas. Select the
desired power supply by turning the energy
selector switch A. The energy selector switch A
has four settings: OFF, AC mains voltage, DC
(battery) gas.
Electrical operation
Appliances with battery igniter (handbook energy
selection
)
Switch on the appliance by turning the energy
selection switch a clockwise to position:
230V operation
12V operation
In order to prevent discharge of the on-
board battery, 12V operation should only be
used while the motor is running.
Gas Operation (Liquefied Gas)
The refrigerator must be operated using liquefied gas (propane or butane NOT
natural gas or town gas) When using LPG please consider that the burner needs
cleaning at shorter intervals due to the gas combustion method (annually)
In Europe, gas operation is permitted while travelling only on the condition that
the gas system of the vehicle is equipped with a hose rupture protection. The
national regulations of the respective country must be observed.
For physical reasons, ignition faults could occur starting from an altitude above
sea level of approx. 1000m/3280 ft. (No malfunction!).
On the initial refrigerator start-up or after a cylinder change, air may be trapped in
the gas line. To purge the air from the lines, switch on the refrigerator and any
other gas appliances (e.g. stove) for a short time. The gas ignites without delay.
AS A BASIC RULE, GAS OPERATION IS PROHIBITED IN FUEL STATIONS.
Prior to starting the refrigerator in gas mode:
• Open the gas cylinder valve.
• Open the shut-off valve for gas supply to the refrigerator.
Fig 15
Fig 16