Bailey ADVANCE 2019 Owner'S Manual Download

Page: 64 / 178

SOLAR DU

AL B

TTER

Y CHAR

GER

aintenance

The power supply must always be disconnected

before performing any maintenance work. Any
light should be prevented from being cast upon

the panel(s). Therefore you should completely

cover the panel(s) before attempting any

maintenance. Clean the device with a dry, lint-

free cloth.

epairS

Do not repair or modify the device. Please

contact your Bailey retailer.

The below are not suitable for charging:

• 6V batteries or 6V lead accumulators
• Non-rechargeable batteries
• Nickel-cadmium batteries

If batteries with a rated voltage of 6V
are charged with the device, gassing
occurs immediately. An explosive gas
may be created.

The device is only suitable for regulating solar
modules. Do not connect any other voltage

sources (e.g. main voltage 230V) to the device.
This may destroy the device and/or sources.

Further information can be found on the Truma
website: www.truma.com.

Summary of Contents for ADVANCE 2019



















































































































































































Search results

Summary of Contents for ADVANCE 2019

Reviews:

Related manuals for ADVANCE 2019

Brands by name

Popular brands

Bailey ADVANCE 2019, Owner'S Manual

Search results

Summary of Contents for ADVANCE 2019

Reviews:

Related manuals for ADVANCE 2019

Brands by name

Popular brands