Baileigh PH-19VS, Operator'S Manual, Page: 38 / 39

Power Hammer Safety Instructions
1. Maintenance.
Make sure the Power Hammer is
turned off and disconnect electrical power before any
inspection, adjustment or maintenance is carried out.
2. Power Hammer Condition.
Power Hammer
must be maintained for proper working condition.
Never operate a Power Hammer that has damaged
or worn parts. Scheduled routine maintenance should
performed on a scheduled basis.
3. Leaving a Power Hammer Unattended.
Always turn the Power Hammer off before leaving the
Power Hammer. Do not leave Power Hammer running
unattended for any reason.
4. Hand Hazard.
Keep hands and fingers clear from
moving parts. Serious injury can occur if hand or
finger tips get pinched between tooling.
5. Gloves & Glasses.
Always wear leather gloves
and approved safety glasses when using this machine.
6. Avoiding Entanglement.
Tie up long hair and
use the correct hair nets to avoid any entanglement
with moving parts.
7. Understand the machines controls.
Make
sure you understand the use and operation of all
controls.
8. Warning Labels.
Take note of any warning labels
on the machine and do not remove them.
9. Overloading Machine.
Do not exceed the rated
capacity of the Power Hammer. Please refer to the
manual for capacities.
10. Hearing Protection and Hazards.
Always
wear hearing protection as noise generated from
machine and workpiece vibration can cause
permanent hearing loss over time.
11. Eye Protection.
Always wear safety glasses
when using and cleaning this machine.
12. Work Area Hazards.
Keep the area around
the Power Hammer clean from oil, tools, chips.
Pay attention to other persons in the area and
know what is going on around the area to ensure
unintended accidents.
13. Level Machine.
Level the machine on a flat
concrete surface by using a spirit level.
14. Call For Help.
If at any time you experience
difficulties, stop the machine and call you nearest
branch service department for help.
Machinery House
requires you to read this entire Manual before using this machine.